Page 1 of 1

PostPosted: Tue Nov 18, 2003 5:44 am
by Herman
Hi,

If you have problems with Todos external ISDN modems, failures like chat timeout and initialization failures (may be applicable to other modems as well) you might want to try this:

add the command echo "AT%B8" > /dev/cua0 (or wherever you have installed your modem) immediatly after the serial port is initalized. Add %B8 to your MINITO as well.

This force the modem to use 115200 bps. For some reason my modem tries to use 230400 by default.

I put mine in rc_comm ... I guess there is some better place to put it. But it worked.

(It might be possible to store a new AT&F in the modem where %B8 is set, but i haven't tried it)