Page 1 of 1

Troubles with PopTop

PostPosted: Mon Jun 14, 2010 2:11 am
by bec
Hi,

I installed PopTop last night. It started fine & I was able to log into my router from my work laptop via it's GSM wireless connection. I could navigate the Freesco Web admin panel just fine. However when I returned to my home laptop Freesco had died. Stone dead. Couldn't be pinged, no contact at all. Neither my nor my son's laptop could access the internet.

I'm wondering what I'm doing wrong. I've attached a report.

Thanks

Brian

Re: Troubles with PopTop

PostPosted: Mon Jun 14, 2010 8:04 pm
by Lightning
can you also attach the PoPToP configuration as well. This can be done by using this command
Code: Select all
report "cat /etc/ppp/pptpd.opt"

Then attach a new report.txt

Re: Troubles with PopTop

PostPosted: Tue Jun 15, 2010 7:28 am
by bec
I couldn't get the command to work, however here is the file nominated:
l
ock
lcp-echo-interval 30
lcp-echo-failure 3
name router.inet
auth
nobsdcomp
proxyarp
-chap
-chapms
+chapms-v2
#mppe-40
mppe-128
mppe-stateless
ms-dns 192.168.101.1
## If you have samba installed and configured as a wins server uncomment the
## next line and put the correct IP address in place.
#
#ms-wins 192.168.101.1


No config changes have been made so the previous report.txt is representative.

I hope this is the information you need to help.
Thanks for your interest.

Brian

Re: Troubles with PopTop

PostPosted: Tue Jun 15, 2010 8:54 am
by Lightning
Yes it is what I asked for, but I showed the wrong file. What I really need is the /etc/pptpd.conf file as well.

Re: Troubles with PopTop

PostPosted: Wed Jun 16, 2010 8:44 am
by bec
No problems. The only active lines in the file are:
localip 1.1.1.100-105
remoteip 192.168.101.100-105


Thanks again

Brian

Re: Troubles with PopTop

PostPosted: Wed Jun 16, 2010 7:03 pm
by Lightning
Unfortunately or fortunately depending on how you want to look at it I do not see anything wrong with any of your configuration. So I am not quite sure what to tell you on how to resolve the current issue.