Connecting Freesco To Ap Mikrotikos

[nickie]

Isp
|
Cablemodem
IP: DHCP ISP
|
Eth0: 192.168.0.1
FREESCO
Eth1: 192.168.1.1
|
Switch/Hub - - - - - - LAN to client via UTP cable
|
Eth0: 192.168.1.10
Eth1: 192.168.2.10 - - - - - - - LAN to client via UTP cable
MIKROTIK (Bridged)
Eth2: 192.168.3.10 (Wireless Card) - - - - - - - - Set as AP Bridge, gataway: 192.168.1.1, DNS: 192.168.1.1
|
Wireless Clients via Hotspot (Clients got IP automatically)

Clients and AP are already shaking hands but no internet connection.
I tried to add:

        -- cat /etc/restrict.cfg --

al,192.168.1.10/24
al,192.168.3.0/24

But still didn't work. Is there anything I miss in reconfiguring Freesco security? Thanks

[CDFiXER]

If you are planning on making a new post. Here are some guidelines.
Information is the key to having your problem solved. For first time users that are having problems with Freesco, a report.txt is required. This is the only way for you to give all of the required information. Also a detailed explanation of your problem. A description of what you have done and what you are planning on Freesco doing for you. Such as being a firewall ethernet router, dial-up router, print server. Enough information so that what configuration you really need can be figured out. I think most people on this forum do not mind reading more than one paragraph that only states I am using Freesco and it is broke A report.txt can be generated a number of ways depending on your install. But the simplest is from a floppy based Freesco. Just type
report

from a command prompt. This will generate the report.txt . Then shut down the router with

halt

place the floppy in a DOS/Windows machine and copy the file "report.txt" and attach it to your post. Please do not cut and paste it. Because it makes the posts very long and hard to follow. There is an "Browse" button that can be used for attaching files. If you don't see the "Browse" button then you need to register

Do not create the report.txt file while in ""SETUP"" mode. Not all information will be included in the file and we will not be able to help to a full extent.

Also, what is this device:

Eth0: 192.168.1.10
Eth1: 192.168.2.10 - - - - - - - LAN to client via UTP cable
MIKROTIK (Bridged)
Eth2: 192.168.3.10 (Wireless Card) - - - - - - - - Set as AP Bridge, gataway: 192.168.1.1, DNS: 192.168.1.1

Oddly enough, once we have a report.txt often the amount and accuracy of assistance goes up exponentially. :rolleyes: