memory size too low in freesco?

If you need some help, this should be the first place to look.

Postby dingetje » Tue Sep 17, 2002 4:20 am

<font color='#000080'>Situation:
  • memory size under freesco is too low.
  • memory size in BIOS is reported correctly
  • applying the FAQ to change the loadlin command in router.bat does not help
This problem may be solved by removing the loading of smartdrv, as reported by on4by:
I had the same problem.
Removed the smartdrive ?command from the autoexec.bat ( or config.sys ... dont remember right now) and memory in freesco went from 16 to 32MB.
regards
Stefaan


Thanks Stefaan!

Update
Possibly it may also be required to remove the loading of HIMEM.SYS in your CONFIG.SYS.

In short, make your CONFIG.SYS and AUTOEXEC.BAT as simple as possible. Your going to run FREESCO anyway, right, so why bother with that DOS crap?</font>



<!--EDIT|dingetje|1032369142-->
dingetje
 

Return to FAQ - Frequently Asked Questions

Who is online

Users browsing this forum: No registered users and 2 guests

cron